NOW OFFERING CO2 TANK REFILLS & EXCHANGE
CONTACT US TO LEARN MORE!
CO2 SYSTEMS
CO2 is arguably the most important element in the planted aquarium. It is required by all plants to undergo the process of photosynthesis. Plants need a constant supply of CO2 during the light hours, otherwise they can suffer. They combine the CO2 with water and light energy to produce oxygen and sugars to enable growth.
In the wild, plants get their CO2 in large quantities naturally from substrate (mud) and degrading plants. However, in a enclosed aquarium, CO2 is very limited. Water from your tap is depleted from CO2 and plant decay in an aquarium is minimal compared to the wild. This is why many aquarists have found out that supplementing CO2 really does help their plants grow much better and a lot stronger.
Deciding whether you need CO2 injection or not, or how much you need, depends on the amount of light you are supplying, and the selection of plants you wish to grow.
In low light aquariums, CO2 is not always necessary. Plants are less stimulated to grow under low light, so extra injected CO2 is not required as there is normally enough CO2 supply coming from surface agitation, fish respiration and organic breakdown of dead plant matter. However, adding CO2 in a low light tank will still improve the quality of growth and health of your plants.
Under medium - high lighting the aquarium becomes CO2 limited. The aquarist must now start adding CO2 to meet the plants demands. If the aquarium remains CO2 limited, your plants will suffer from growth deficiencies, and as a result you will experience algae formations.
OUR CO2 SYSTEMS AND SUPPLIES
SERA FLORA C02 REACTOR
THE NEW GENERATION OF CO2 REACTORS
The sera flore CO2 active reactor is integrated into an existing water circuit (e.g. external filter), or it can alternatively be operated with a pump. The rotors ensure strong blending of CO2 with the aquarium water, allowing to dissolve several hundred CO2 bubbles per minute.
The holder included with the kit allows attaching the reactor inside or outside the aquarium (e.g. in the cabinet), depending on the existing installation. The material color (smoky gray) is effective against algae settlement. Easy to clean.
Recommendation:
sera flore CO2 active reactor 500 (up to 500 bubbles CO2/min): for aquariums ranging from 250 liters (66 US gal.) up to 600 liters (159 US gal.)
sera flore CO2 active reactor 1000 (up to 1,000 bubbles CO2/min): for aquariums above 600 liters (159 US gal.) and densely planted aquariums
SERA FLORE CO2 PRESSURE DIFFUSER
The sera flore CO2 pressure diffuser, made of high quality acrylic, combines functionality and design. The fine pored ceramic disc produces particularly fine CO2 bubbles. It is easy to take out and clean or replace. With integrated bubble counter, suitable for aquariums up to 300 liters.
SERA FLORA C02 BUBBLE COUNTER
For monitoring the CO2 addition in aquariums
The sera flore CO2 bubble counter allows easy counting of CO2 bubbles for monitoring carbon dioxide fertilization.
The fine nozzle within the bubble counter ensures clear separation of the CO2 bubbles which can be counted quickly and precisely. Due its small size, the bubble counter can be placed unobtrusively.
SERA CO2 START
The sera CO2-Start fertilizer system is easy to install and operate. It is ideal for the very widespread and popular smaller aquariums up to approx. 120 liters (31.8 US gal.). sera CO2-Start consists of an optically unobtrusive sera CO2 diffusion reactor and the corresponding sera CO2-Tabs plus.
This convenient and uncomplicated CO2 fertilization system can be integrated into the aquarium even by beginners without any previous knowledge entirely without any problems.